fb in

Our Products

isotec logo

flexim

rothoblaas

floplast  

iko  

  iokpol

lascala  

 elyplast  

industries  

leadsheet

SPECIFICATIONS

ISOTEC LINEA SPECIFICATIONS

The thermal insulation must be created using an insulation system consisting of:

a modular, self-supporting and insulating monolithic structural panel, made of rigid closed-cell polyurethane foam with a density of 38 kg/m3, self-extinguishing, class 0-2 (M.D. 26/06/1984 and M.D. 03/09/2001) and Euroclass F (EN 13501-1), with declared thermal conductivity λD of 0.022 W/mK(according to UNI EN 13165), and declared thermal resistance RD of not lower than 2.70 m2K/W for 60 mm thick panels, 3.60 m2K/W for 80 mm thick panels, 4.50 m2K/W for 100 mm thick panels, 5.45 m2K/W for 120 mm thick panels and 7.25 m2K/W for 160 mm thick panels.

The 11cm thick metal profile covered in aluminium, zinc and silicon alloy integrated in the panel has a continuous modular surface, on which can subsequently be fixed finishing units or support elements of these units. The stiffener also comes with multiple holes aligned along two parallel lines placed at the edges of the metal profile.

The panel is shaped with longitudinal overlapping stiffeners on the long side and dovetail joints on the short side. The panel is covered by embossed aluminium foil on both the intrados and extrados.

The panel must carry the CE marking approved by certificates issued by accredited bodies.

Width: 340 mm (other pitches available on request)
Length: 3000 mm
Thicknesses: 60 mm, 80 mm, 100 mm,120 mm and 160 mm.